﻿Network Interface is UP!
NIFM Address Ipv4      : 192.168.1.104
NIFM Network Mask Ipv4 : 255.255.255.0
NIFM Gateway Ipv4      : 192.168.1.1
NIFM DNS1 Ipv4         : 10.1.19.29
NIFM DNS2 Ipv4         : 10.1.19.30
Sample will use [Nifm] assigned network interface [192.168.1.104]
Initializing libupnp: (Requesting) IPv4 Network Interface Address:Port: [192.168.1.104:49152]
Successfully Initialized libupnp: (Actual) IPv4 Network Interface Address:Port: [192.168.1.104:49152]
Control Point Initialized
UDN              : uuid:upnp-InternetGatewayDevice-1_0-0090a2777777
DeviceType       : urn:schemas-upnp-org:device:InternetGatewayDevice:1
FriendlyName     : Linksys BEFW11S4 V4
BaseUrl          : http://192.168.1.1:5678
RelativeUrl      : /index_UPnP.htm
PresentationUrl  : http://192.168.1.1:5678/index_UPnP.htm
WANCtrlUrl       : http://192.168.1.1:2468//WANIPConnection
Advert Tmout     : 120
Device: [uuid:upnp-InternetGatewayDevice-1_0-0090a2777777] - Created
CommandLoop - Begin!
Searching for UPnP Devices matching to DeviceType: [urn:schemas-upnp-org:device:InternetGatewayDevice:1]
Match found for UPnP DeviceType: [urn:schemas-upnp-org:device:InternetGatewayDevice:1]
Successfully sent AddPortMapping!
AddPortMappingCallBack(): Action Completed Successfully
Caught event EventCode_SignaledTimer on State_Waiting
Changing state [State_Waiting] to [State_Idle]
Waiting for AddPortMapping response!
Successfully sent GetSpecificPortMappingEntry!
*************************************************************
GetSpecificPortMappingEntry - Action Completeted Successfully
** Name: [NewRemoteHost], Value []
** Name: [NewExternalPort], Value [9000]
** Name: [NewProtocol], Value [TCP]
** Name: [NewInternalPort], Value [22000]
** Name: [NewInternalClient], Value [192.168.1.104]
** Name: [NewEnabled], Value [1]
** Name: [NewPortMappingDescription], Value [example]
** Name: [NewLeaseDuration], Value [0]
*************************************************************
Waiting for GetSpecificPortMappingEntry response!
Successfully sent DeletePortMapping!
DeletePortMappingCallBack(): Action Completed Successfully
Waiting for DeletePortMapping response!
CommandLoop - End!
Exiting!